Asterix Shadow

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At Layer #9 Pause Change Black to White on AMS At layer #11 (0.96mm) swap to Mandarin Orange At layer #18 (1.52mm) swap to Lemon Yellow At layer #24 (2mm) swap to Black (Jade White) for the rest.