Atari ST 2.42" Oled Display Floppy Stack

Stack of 3 3.5" floppy disks, with an opening cut out to hold a 2.42" OLED display. It's currently printing, soon as it's done I'll update with a picture. The idea is to sit it on top of the ST, and run the wires for the display through the top vents. I plan on adding 3 buttons as well, for + - and eject. I'm attempting to mount both the original floppy, and a de-cased Gotek internally, and have them be swappable via a hidden switch.

2.42" OLED I used: https://www.ebay.com/itm/132059553860

I've modified the top of the stack in the v2 file so that the metal 'door' section has a wider outline that's cut a bit deeper into the face. I've also adjusted the stack a bit in the hopes that the overhangs won't be quite as bad.

v3 has 3 button holes.

v4 Complete redesign, dimensions should be correct, opening for OLED should fit without enlargement. Cleaned up quite a bit as well. One has SONY MF2DD on the top, one is blank. Also went from 3 buttons down to 2. The SONY logo'