Athena

Created with HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 1.8mm and the Actual Depth is 1.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #3 (0.32mm) swap to Green At layer #5 (0.48mm) swap to Gray At layer #7 (0.64mm) swap to Ivory White for the rest.