Thingiverse
Atomic Sun
door sascha9021341
10
Downloads
10
Likes
0
Makes
A re-design of the Atomic Sun (https://www.thingiverse.com/thing:6178) in OpenSCAD
This is version 2, almost 2 years after my first attempt. The parts have major improvements. The goal was to create a version that is easy to print, assemble and does not require a lot post processing.
Everything can be printed without support and a glass bed works well for visible surfaces with a glossy finish.
I am using 20x10W dimmable LEDs, 10x warm white and 10x cold white, 4 different channels to adjust the color and direction of the light. A few images are version one since this is work in progress.
I developed a 4 channel trailing edge WiFi dimmer for this lamp to use different LEDs that did not work so well with my leading edge dimmer.
https://github.com/sascha432/trailing_edge_dimmer
This is version 2, almost 2 years after my first attempt. The parts have major improvements. The goal was to create a version that is easy to print, assemble and does not require a lot post processing.
Everything can be printed without support and a glass bed works well for visible surfaces with a glossy finish.
I am using 20x10W dimmable LEDs, 10x warm white and 10x cold white, 4 different channels to adjust the color and direction of the light. A few images are version one since this is work in progress.
I developed a 4 channel trailing edge WiFi dimmer for this lamp to use different LEDs that did not work so well with my leading edge dimmer.
https://github.com/sascha432/trailing_edge_dimmer
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
