Atomstack A5 Air Assist Mod

More to 3d themes: https://www.facebook.com/groups/3ddruckercommunityd

Air Assist mod and honeycomb grid for the Atomstack A5 laser cutter

The fan mod is used instead of two spacer sleeves for the controller board of the laser and inserted into the two tabs of the privacy screen at the bottom of the laser output.

Soldering skills, heat shrink tubing and a few parts are required for the mod:

Laser Atomstack A5 https://ebay.us/zcRSW7

Fan 12V https://ebay.us/Kgj3zA
Switch https://ebay.us/yIQZke
Cables and sockets JST XH 2.54 mm male / female 2 pin https://ebay.us/pHE8pZ
Aluminum honeycomb panel 600x400 mm https://ebay.us/qDvlxa
Floor tile 500 x 500 https://ebay.us/PCpXxs
10x10 L aluminum profiles
4x M5 screws and nuts
4x M3 screws

The 12V fan to blow the smoke away is connected in parallel to the cooling laser fan. To do this, two JST XH sockets are soldered in parallel and the cable with plug is plugged onto the back of the controller board. The fan for cooling t