Thingiverse
Atomstack Pro 20 - Laser - legs
by kpr
2
Downloads
1
Likes
0
Makes
Once I got Atomstack Pro laser with 20watts I was very lucky. But not so long, I find out that they forgot pack three metal legs. I applied claim, but in meantime I want work with laser... so I did this leg.
What you need buy / mount :
1) It is mounted by one or two DIN 912 (L = 20mm)
2) Nut which slides in extrusion profile. (aliexpress)
You can use spacer to tailor the height. There is headroom about 1-2 milimeters.
3) As a leg, I used M8 hex bolt (M8x16 = to achieve 40mm as standart tall of Atomstack).
4) You need one M8 nut DIN 934, maybe littlebit of resin glue or cyanoacrylate to hold it.
What you need buy / mount :
1) It is mounted by one or two DIN 912 (L = 20mm)
2) Nut which slides in extrusion profile. (aliexpress)
You can use spacer to tailor the height. There is headroom about 1-2 milimeters.
3) As a leg, I used M8 hex bolt (M8x16 = to achieve 40mm as standart tall of Atomstack).
4) You need one M8 nut DIN 934, maybe littlebit of resin glue or cyanoacrylate to hold it.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
