AtomX Micro FPV Frame

3 inch FPV frame sub 250g




13xx to 15xx motors (with 12x12 or 14x14mm mounting holes)
20x20 or 25,5x25,5mm stack
19mm camera
20x20 VTX (Caddx Vista ready) and optional mounts.



Use supports except for the rear roof, as you can see in the picture.

The lipo holder is almost the same than for the Qarks 150 and designed for 4S 650Mah with 30x20 dimensions, I’ll add some holes to mount it.

I’ve achieved the first build with the following and it really fly like a charm (maiden video soon) :



Emax RS1306B 4000kv or TBS Podracer 1505 3600KV motors
JHEMCU GHF411AIO Pro Flight controller (AIO F4 with 25A esc)
Rush Tank Mini 5.8Ghz Vtx
Micro Lollipop antenna
Caddx Ratel 1200tvl camera



For the first try, I’ve set
1.6mm wall thickness
1.2mm top/bottom
50% infill

EDIT 18/10/2021
Added Runcam 2 holder and updated frame.
On the v2 i've raised up the base plate from 2.5 to 3mm, rounded some corners and modified the camera mount.

EDIT 20/10/2021
Added Runcam 2 h