Auto Bed Leveling Control Widget

Note: This guide was adopted from the creator. The original project can be found here.DescriptionBambulab ABL Widget V2 : Bambulab ABL Widget is a simple accessory that let you easily see Z axis movements up to less than 100µm. You can easily see how much Z axis is moving :when print head is shakingwhen print head is homingwhen making an Auto Bed Levellingwhen printing (and see how much Automatic Bed Levelling is used while printing)when you move hotend from printer menus (or studio) By moving print head using menus to desired locations, it is a convenient tool to verify if your bed is warped and how much.You will need a magnet (10mm diameter, 2mm thick) for a better installation an to be able to manually adjust or rmove the cursor at anytime.If you don&#39;t have a magnet you can still use the printed pin that make the same size, but you will have to glue it in place, not the best solution. Push the magnet into the cursor, it is very tight. <img src="https://makerworl