Automatic drawer closing mechanism

3D printing instructions:1. Orientation The part consists of geometry based on disks and cylindrical shapes.Recommendation: Print the part with the largest flat surface facing down (on the build plate). This ensures optimal bed adhesion and minimizes the need for support structures.2. Infill & Layer SettingsLayer Height: The model features rounded edges and subtle curves. For a smooth and precise finish, a layer height of 0.12 mm to 0.16 mm is recommended. If precision is less critical, 0.2 mm can be used.Infill: As this is a mechanical component, an infill of 20%–40% is recommended using a strong pattern (such as Gyroid or Grid) to ensure long-term durability.Walls/Shells: Use at least 3–4 wall loops (perimeters) to reinforce the structural integrity.3. Supports The part includes elements protruding from the main body and complex curvatures.Recommendation: Enable Supports, especially for overhangs exceeding 45 degrees. Using "Tree" supports is recommended for easier removal an