Avatar - Hueforge

Hueforge of Avatar posterThe photos shows the result in 200*143mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 143.43x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.68mmThe Max allowed Thickness is 2.44mm and the Actual Thickness is 2.36mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: