Axis calibration

This is a calibration test for all printers. Thus, you can adjust your printer's parameters.

Advantages of this new model are :
✅ printing is faster
✅ it requires less plastics than the calibration cube.


➡ Here are the measurements of the axis:

X : 40 mm
Y : 40 mm
Z : 20 mm

After printing, you can do the following calculations :

d = desired measure (x = 40 mm; y = 40 mm; z = 20 mm)
a = axis measurement
s = actual step value

➡ New step value = d / a * s

Example:
d = 40 mm
a = 39.8 mm
s = 100.00

40 / 39.8 * 100.00 = ~100.50

Now, print it !

➡ Update:
There is a new model that avoid the 'rounded corner' problem.