Back to the Future - Doc Hueforge

https://www.patreon.com/cw/3D_MENTIEL Si vous aimez mon travail, souhaitez vendre mes créations ou trouver des modèles exclusifs venez faire un tour sur mon Patreon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #000000 PLA Deeplee Black Transmission Distance: 0.2 #d70610 PLA Forshape+ Red Transmission Distance: 3.6 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Cyan At layer #21 (1.76mm) swap to Beige for the rest.