Backroads E36 Magnet

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects **You can customize the colors of the car with this design. In your slicer when you swap to Blue, use any color you'd like, and only the car color will change. ** This picture was hand drawn and printed using HueForge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 160x120mm in sizeYou may print at higher layer heights below the Min Depth of 0.76mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA Polyterra Dark Grey Transmission Distance: 0.5PLA PolyLite Blue Transmission Distance: 1.7PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #10 (0.92mm) swap to Dark GreyAt layer #14 (1.24mm) swap to BlueAt layer #17 (1.48mm) swap to White for the rest. Boost Me If you like what I do feel free to