Thingiverse
Bag Clip
von 3dpartmaker
101
Downloads
102
Likes
2
Makes
Handy bag clip.
The hinge is like a spring that can stretch with thicker bags.
The lower claw is slightly curved so that the clip in the middle also press firmly.
It's hollow where possible to save print material.
Start with the 9mm version and choose an other thickness if needed.
Use the uniform scaling function of your slicer to make larger or smaller clips.
Print it solid (100% infill), without support and with a 0.15 or 0.2 layer height.
Use PETG, nylon or ABS filament.
Changes since June 13, 2020:
-added 10mm and 12mm wide Bag Clips which are more robust than the original 8mm version
Changes since October 10, 2021:
-added 9mm Bag Clip
The hinge is like a spring that can stretch with thicker bags.
The lower claw is slightly curved so that the clip in the middle also press firmly.
It's hollow where possible to save print material.
Start with the 9mm version and choose an other thickness if needed.
Use the uniform scaling function of your slicer to make larger or smaller clips.
Print it solid (100% infill), without support and with a 0.15 or 0.2 layer height.
Use PETG, nylon or ABS filament.
Changes since June 13, 2020:
-added 10mm and 12mm wide Bag Clips which are more robust than the original 8mm version
Changes since October 10, 2021:
-added 9mm Bag Clip
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
