Bambu Buffer Mount

Now you can throw away those release tools. Like everyone else, I got tired of fussing with the buffer connections and wanted to build a 2 piece mount that stepped the buffer away from the back a little. I modeled it in Fusion and only after printing a couple of them, I had the bright idea of modifying it so that the PTFE tube is easily removed. It's nothing extremely fancy, but pretty darn handy. The addition of these parts do not make the buffer stick out any farther than the plug on the power cord. (Plug plus cable diameter, assuming you're no smashing the plug into the wall behind the printer.) You will need two 3mm heat set inserts 5mm long and two, 3mm x 16mm flat head screws. The 3mm Flathead screws will be used to mount the base bracket to the back of the printer The 3mm inserts will be imbedded into the attachment bracket. You then use the original screws to mount the buffer to the attachment bracket. The attachment bracket snaps into the base bracket. I very lightly s