Bambu Filament Spool Stackable Holder

这是一款为我的拓竹料盘储物盒设计的可堆叠支架，支架由3部分组成：This is a stackable bracket designed for my bambu filament spool storage box. The bracket consists of three parts:底座 base stand回转轴：包含3个零件 Shaft: 3 parts外径为40mm的PVC管（可选，可以使支架堆叠更高、更稳固）outer diameter 40 mm PVC pipe (optional, can make the bracket stack higher and more stable)以下为打印和装配说明：The following are printing and assembly instructions:为了更好的打印效果，【回转轴 Shaft】盘中的零件1建议开启树状支撑For better printing effect, it is recommended to enable tree support for the part 1.回转轴包含3个零件，如上图。将零件2装入零件1后，将零件3装入零件2。The shaft consists of three parts, as shown in the above figure. After installing part 2 into part 1