Bambu Lab Ring Print Test

This is an un-sliced .3mf file of a 60mm dia. cylinder w/3mm wall x 40mm tall - and a 60x60 square with 3mm wall, and the same in 90mm. Print one box 90* to the xy axis, and one rotated 45*

Print using Bambu Lab default "0.20mm Standard @BBL***" printer settings - 5% infill cubic and 3 wall count. Add default manual brim if needed for bed adhesion MAKE NO OTHER CHANGES IF POSTING

Refer to https://forum.bambulab.com/t/banding-ringing-type-artefacts/1895/20 for posting results. Mark the X and Y axis with sharpie or some such