Bambu Style Cardboard Spool Core Container

Designed to look like a mini Bambu spool. You can add some leftover filament around the cardboard spool. There are different versions available. If you want dividers, make sure to print the divider versions. There are quarter and half divider versions. It is quite a snug fit and requires a bit of force to put the pieces onto the cardboard spool. If you’re printing more than one and want to stack them, you can use the optional connector. The smooth PEI plate gives the best look to match the Bambu spool. It’s better to use only one wall on the first layer. Assembly Instructions The bottom piece is the one with a closed bottom. If using dividers, it’s easier to add the dividers onto the bottom first. There are arrows on the dividers, make sure they are pointing upwards. You can then press on the cardboard spool. The best way is to put the bottom down and press the cardboard spool from the top. The top piece can then be pressed in. If you have dividers, line them up with the notches on the