Bart Simpsons - Horror

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 5 #d1d3d5 PLA BambuLab Basic Light Gray Transmission Distance: 1.7 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to Light Gray At layer #18 (1.52mm) swap to Sunflower Yellow At layer #22 (1.84mm) swap to Jade White At layer #25 (2.08mm) swap to Jade White for the rest.