Basic E14 Lampshade

Model for a E14 lamp. You can modify it in Blockscad

https://www.blockscad3d.com/community/projects/1432925

You need to laminate then with Cura with 3mm bottom thickness (15 layers for 0.4mm approx), 0% infill and vase mode for the rest of the model.

Suggested settings:

- Spiral Vase mode
- No infill
- One perimeter
- Perimeter width 0.4mm or more
- 0.2mm layer height
- 3mm of solid base, so at 0.2mm layer height that's 15 solid bottom layers
- No top layers