Thingiverse
Basic open top box
15
Downloads
5
Likes
4
Makes
This is a basic box that is open at the top. Size is defined by outside dimensions: Length, Width, Height and Wall thickness in mm. Inside dimensions will be smaller by 2 times the wall thickness in L and W.
To create your own STL file to print, click [Open in Customizer] and enter your dimensions.
For best results use a wall thickness that's a multiple of your extrusion width. I set my extrusion width to 0.5mm and work in multiples of that (1.5mm, 2.0mm, etc).
This is created using [OpenSCAD](http://www.openscad.org/) as a first exercise. It's pretty easy to use, check it out.
Box pictured is 172L x 32W x 25H x 1.5T
Thingiverse seems to be having some issues with the Customizer. If you have problems try downloading the file and editing in OpenSCAD.
If you print one please consider posting a picture and printer details. Hope you find it useful.
To create your own STL file to print, click [Open in Customizer] and enter your dimensions.
For best results use a wall thickness that's a multiple of your extrusion width. I set my extrusion width to 0.5mm and work in multiples of that (1.5mm, 2.0mm, etc).
This is created using [OpenSCAD](http://www.openscad.org/) as a first exercise. It's pretty easy to use, check it out.
Box pictured is 172L x 32W x 25H x 1.5T
Thingiverse seems to be having some issues with the Customizer. If you have problems try downloading the file and editing in OpenSCAD.
If you print one please consider posting a picture and printer details. Hope you find it useful.
MatthewGTaylor also publishes on
51 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
