Basstronic's Rem Pod

My contribution to the ghost hunting community with a 3D printer- a Rem Pod. V2 has dropped. The diameter was reduced by 20mm and the height reduced by 12mm. Pictures of the blue are the original, the white is the new. I printed in Glow in the dark blue for the main body and buttons. The bottom, battery bar and board cap I used a natural PLA (clearish). I didnt want to spend around $200 USD on the official “Rem Pod” or the others in the $120-180 range so here it is. I wanted a design that did not involve hot glue gun or using other fillers such as epoxy. I wanted something fairly clean, solid and engineered. I also wanted something with easy to get parts from Amazon. Knowing I want at least 4 of these devices for our gear stockpile, making them was a cheap and easy option. Beware you will need a good soldering iron with a small tip and KNOW how to solder. The JR Theremin is in kit form and is designed for novice circuit soldering folks. Just get a good soldering iron and do not be craz