Batman

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA BambuLab Basic Dark Gray Transmission Distance: 1.4 PLA Elegoo + Gray Transmission Distance: 3 PLA Elegoo + White Transmission Distance: 7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #10 (0.88mm) swap to Gray At layer #14 (1.2mm) swap to White for the rest.