Thingiverse
Bed Leveling Patterns - Universal Sizes - Fast
di S4ge
458
Download
312
Likes
0
Makes
The idea of this project is to provide universal, fast printing bed leveling files.
I often just need 2 to 3 thread wide prints to see if the bed is right.
So the patterns have 4 thread wide arms, which is printed without any surface printing.
That saves a lot of time.
Also sometimes you just want to check a smaller area and not the hole bed, when you just need one small print in the center of the bed. Therefor the smaller patterns.
Next to the .stl files, I also already made .gcode files.
Available Sizes:
-60 mm
-80mm
-100mm
-120mm
-140mm
-160mm
-180mm
-200mm
-230mm
-260mm
-290mm
Available Layer Thicknesses:
-0,12mm
-0,20mm
Printing times:
-60mm -> ~ 1 min
-140mm -> ~ 5 min
-200mm -> ~ 7 min
-290mm -> ~ 12 min
The .gcode is made with the standard settings of Cura for a Ender 3 Pro. I also deactivated the skirts to save printing time.
Watch out:
I am not able to test 230mm, 260mmm and 290mm because I don't have a wide enough
I often just need 2 to 3 thread wide prints to see if the bed is right.
So the patterns have 4 thread wide arms, which is printed without any surface printing.
That saves a lot of time.
Also sometimes you just want to check a smaller area and not the hole bed, when you just need one small print in the center of the bed. Therefor the smaller patterns.
Next to the .stl files, I also already made .gcode files.
Available Sizes:
-60 mm
-80mm
-100mm
-120mm
-140mm
-160mm
-180mm
-200mm
-230mm
-260mm
-290mm
Available Layer Thicknesses:
-0,12mm
-0,20mm
Printing times:
-60mm -> ~ 1 min
-140mm -> ~ 5 min
-200mm -> ~ 7 min
-290mm -> ~ 12 min
The .gcode is made with the standard settings of Cura for a Ender 3 Pro. I also deactivated the skirts to save printing time.
Watch out:
I am not able to test 230mm, 260mmm and 290mm because I don't have a wide enough
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
