Bed Leveling Test - Customizable

A print to assist with leveling your bed.

**Directions**
1) Open in customizer and set **layerHeight** and **layerWidth** to match your current setup.
2) Set **distanceFromCenter** to a number around 20% of your print bed size. On a 200x200mm bed, use around 40.
3) Adjust the other settings if you wish.
4) Create the STL and download it, and prepare it for printing.
5) Check that the printer is ready and build platform is mostly level.
6) Print the test you created.
7) Examine the result and adjust the level. See the tips below.
8) If the print was perfect, print your model. Otherwise go back to step 6.

*Tips*

- Issues which could mean the bed is too low:
- Gaps in the first layer.
- Corners or edges peeling up.
- Complete failure to stick to bed.
- Issues which could mean the bed is too high:
- No filament extruded/missing peices.
- Layer is not smooth/has bumps and lines.
- Leaves a trail of filament between pieces.
- Also compare the thickness of