Bed Support

Bed support for Tevo Tarantula (or any other with distance holes 209x209mm)

Note
- cable carter (you can find the cable chain here: https://www.thingiverse.com/thing:2983107)
- aluminum U-profile to stiffen the structure. external measures 8x8mm (internal measures 6x6mm)
- only for MGN12 rails. not for stock wheels

you need:
- 4 M3x30mm screws
- 8 M3x25mm screws
- 8 M3 nuts
- M3 washers (optional)
- 3.5mm drill bit
- 4 stock springs
- 2 M3x16 and 2 M3 nuts (to block the GT2 with screws)

assembly:
- cut the aluminum profile to size and place it in place on the piece below
- place the piece on top
- insert the four M3x30 screws as a stop (do not mount on the track yet)
- drill (use the hole as a guide) and fix the four central M3x25 screws
- drill and fix the angle with four M3x25 screws
- mount on the rail