Thingiverse

BedSide Tray

by Taeho98

18 Downloads

17 Likes

0 Makes

I initially designed this for my grandma, but I might as well share it here.
The purpose of this tray is to be latched to the side of a bed and to hold items.

The hook is made for 24mm thick material and it takes DIN912 M3 bolt and DIN934 M3 nuts.

- The entire print took me about 9.5 hours and about 300grams of filament. This is printable without support but I did use a brim.

- The tray is printed in two parts and glued together with super glue.

- There are 2 rods used for alignment of the 2 parts during assembly; 5mm and 3mm.

- Dimensions of the parts and bolt locations are given in the drawing so you can replace the hook with your very own part to suit your needs.

bed bedside bed side bed tray desk desk tray glasses glasses holder item holder pencilholder pencil holder pen holder phone phone holder phone tray remote holder side smartphone holder tray bed bedside bed side bed tray desk desk tray glasses glasses holder item holder pencilholder pencil holder pen holder phone phone holder phone tray remote holder side smartphone holder tray

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · 2-part assembly · significant post-processing

Support-free Hardware needed

Supports 0/3

Assembly 1/3

Settings 1/3

Bed size 0/3

Post-process 2/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

9.5 h

Post-processing

Gluing, Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does BedSide Tray need supports when printing?

No supports needed for BedSide Tray — it's designed to print clean off the bed.

How long does it take to print BedSide Tray?

According to the design notes, BedSide Tray takes approximately 9.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is BedSide Tray available in?

BedSide Tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is BedSide Tray free to download?

Yes, BedSide Tray is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

BedSide Tray

Similar Models

Add to Collection