Thingiverse
Beercake
door Counterdoc
22
Downloads
11
Likes
0
Makes
A perfect birthday present for every beer friend. It fits the standard 500 ml Euro-bottles (70,5 mm diameter).
The design offers a firm fit to the top cap and the bottom of the bottles. The parts of the bottom section should be tightened to a wooden plate for example.
I recommend to print the top and middle section upside-down with support to get a nice finish on top of the cap brackets.
Number of parts needed:
1x Bottle_Cap_1_2_2.stl
1x Bottle_Cap_Top.stl
1x Bottle_Cap_Middle.stl
7x Beercake_Bottom_Bottlebracket.stl
The design offers a firm fit to the top cap and the bottom of the bottles. The parts of the bottom section should be tightened to a wooden plate for example.
I recommend to print the top and middle section upside-down with support to get a nice finish on top of the cap brackets.
Number of parts needed:
1x Bottle_Cap_1_2_2.stl
1x Bottle_Cap_Top.stl
1x Bottle_Cap_Middle.stl
7x Beercake_Bottom_Bottlebracket.stl
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!