Begode Master Bushing Stabilizers

2023-01-25: Adjusted the upper stabilizer from the previous 2.75mm height to the new 2.5mm height, individually they work great but when both sliders are connected via the suspension bridge the 2.75mm tends to add friction due to poor tolerances in the whole suspension system on the Master and 2.5mm height adjustment should provide a workaround for that.

The Master suspension has a lot of tolerance between the bushings and the pipe that they move on causing the suspension to feel "loose", Begode has added 4 small screws that you can adjust to tighten the bushings against the pipe but these are problematic for a couple of reasons:

1) It's difficult to adjust all 4 of these screw perfectly, if you tighten them to much it will cause friction and suspension will be noticeable more stiff

2) The screws push the bushing from one direction making it oval and also risk damaging them.

These "stabilizers" is a ring that pushes the bushing from all directions and I've measured and test