Bemding Tool Flat Bar

Manual Flat Bar Bender This project is a manual flat bar bending tool designed for hobbyists and makers.It allows controlled bending of flat bars using a simple roller mechanism and a hand-operated crank.📐 Bending CapacityMaximum flat bar width: up to 45 mmThickness: tested only on thinner materials⚠️ Steel flat bars have NOT been tested – use at your own risk🛠 Hardware & Assembly Notes🔩 Main Bolts (Hex key 13 mm)3 × bolts, length 100 mmUsed for the main structure and roller mounting⚙️ Bearings7 × ball bearingsOuter diameter: 22 mmInner diameter: larger than a standard M8 bolt→ requires using a smaller bolt with spacers or sleeves to properly center the bearing(Standard 22 mm OD bearings are typically 608-type: 22 × 8 × 7 mm — verify before assembly)⚙️ Drive Gear MountingBolt used to mount the drive gear: Hex key 13 mmLength: 40 mm 🔧 Crank MountingM6 boltLength: 30 mmUsed to attach the crank handle to the drive mechanism📏 Height Adjustment (Main RollerThreaded rods (studs): Hex ke