Bendy Coaster

This is a drinks coaster with a slight difference - it is bendy in one direction, even when printed with material such as PLA. The bends are achieved by following along with the excellent Youtube tutorial, cutting the plane at regular intervals:https://www.youtube.com/watch?v=8WEqKYa6XRk In this case the same default sizing values as per the above tutorial are also applied on the model here - enabling a one-plane bendable interface. Notes on printing: Printing these models don't come cheap in terms of material nor time. For the various models:Fast/Rough - 0.28mm draft with a single top/bottom layer since it is a functional model for the most part for a total thickness of 1.68mm. (Decorative comes into play slightly, but textured plates do the trick here - which is what I use for my prints). This top-level roughness is certainly not for the faint of heart, even with a textured bottom that will end up as the drinks holder. It will feel draft-y/rough in actual use.Slow/Smooth - 0.28mm