BEST SOCKET RAIL MODULAR SYSTEM

OKAY, since I have had a lot of people like my wrench hold design i thought i would upload my socket rail system. so, here is the info on the rail system 1.) the rails have different sizes ranging from 2 inches long all the way up to 8 inches long also every half inch in between. So, a total of 14 different rails to choose from 2.) The END CAPS are the pieces that you will need to put at the end of each side of the rail, so the magnets don't slide out. 3.) The SOCKET HOLDER is designed to be printed in TPU. You can print it standing up right or lay it down flat. I have designed it so the outside of the holder that get inserted into the socket it will apply pressure, so your sockets don't fall off. I have tested this by picking up a fully load down rail and turning in it upside down and shaking it. WHEN PRINTING THESE MAKE SURE YOU DO IT AT 100% INFILL AND USE NOTHING BUT TPU, I DONT KNOW IF PLA FLEX WOULD WORK I HAVENT TRIED IT BUT DO THAT AT YOUR OWN RISK PLA WILL NOT WORK 4.)