Betta fish

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x150mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA Elegoo + Red Transmission Distance: 3.5 PLA BambuLab Basic Orange Transmission Distance: 4.8 PLA Elegoo Basic White Transmission Distance: 7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #15 (1.28mm) swap to White for the rest.