Thingiverse
Bezel for 0.91" OLED 128x32 Module
by peaberry
5
Downloads
10
Likes
0
Makes
This is a simple bezel which can be used to mount a 0.91" OLED 128x32 display module on a panel. It's intended to be used with two M3 screws direct into the plastic through the panel from the rear. The mounting holes are 46mm apart and 4mm deep. The overall size is 54x20x5mm. Note that the OLED is not symmetrical, so it only fits the opening in one orientation (should be obvious when you try it).
The part I used was described as "I2C OLED Display Module I2C Screen Tiny Module 0.91 Inch Blue 128X32 DC 3.3V to 5V"
The part I used was described as "I2C OLED Display Module I2C Screen Tiny Module 0.91 Inch Blue 128X32 DC 3.3V to 5V"
peaberry also publishes on
7 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
