Big Fredd's Corner Multi-Sensor

This is a corner mounted DIY Multi-sensor that I designed.

It has a PIR (motion) sensor at the top, a brightness sensor just below that, and a temp/humidity/pressure sensor mounted on the bottom surface. These are connected to an ESP8266 NodeMCU to communicate with your home automation devices.

All were printed with the outward side facing the build plate. I did not try without supports, but they are highly recommended.

I used the following components:
NodeMCU: https://www.amazon.com/gp/product/B07CB4P2XY/
PIR Sensor: https://www.amazon.com/gp/product/B07RT7MK7C/
Lux Sensor: https://www.amazon.com/gp/product/B01HTC5OYI/
Temp/Humidity/Pressure: https://www.amazon.com/gp/product/B07KYJNFMD/
You will also need some DuPont jumpers. I used a DuPont kit and crimper.
Dupont Kit: https://www.amazon.com/gp/product/B07BDCG7DW/
Crimper: https://www.amazon.com/gp/product/B01CE4FAMW/

You will need a microUSB cable with 5V power to power this device up.

The PIR and Lux sen