Thingiverse
Bike
door Kissekrask
193
Downloads
201
Likes
4
Makes
A bike I made while learning IronCAD. Printed a few in PLA on a Ultimaker2.
Pieces snap together easily (at least the parts for the large bike). You should be able to assemble it without any instructions.
Bike_04nozzle.stl = The whole bike, print it with 0.4 nozzle. (No text on the frame)
Bike_025nozzle.stl = The whole bike, scaled down to 50%. Print it with 0.25 nozzle. (No text on the frame)
I have also added all the individual parts so that you can remix more easily. They are all in original size.
If you want to add your own text, a name or similar to the frame... upload the file called (frame_text.stl) to Tinkercad or similar and just add some text to it. Look at frame_text_example.stl and you will see how the text should be placed.
Check the part in the slicer before you print it.
Pieces snap together easily (at least the parts for the large bike). You should be able to assemble it without any instructions.
Bike_04nozzle.stl = The whole bike, print it with 0.4 nozzle. (No text on the frame)
Bike_025nozzle.stl = The whole bike, scaled down to 50%. Print it with 0.25 nozzle. (No text on the frame)
I have also added all the individual parts so that you can remix more easily. They are all in original size.
If you want to add your own text, a name or similar to the frame... upload the file called (frame_text.stl) to Tinkercad or similar and just add some text to it. Look at frame_text_example.stl and you will see how the text should be placed.
Check the part in the slicer before you print it.
Kissekrask publiceert ook op
1 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
