Blisstwig - a flight controller

DONT TRY TO BUILD IT; IT DOES NOT WORK; THIS IS JUST A CONCEPT GRAVEYARD

THE JOYSTICK IS HARD WIP, ITS A MESS AT THE MOMENT

A little Joystick (Blisstwig, yes i used a Thesaurus for this) with a turnable head and seperate throttle controll,

this is more or less just a backup

using a some M3 and M2 screws, cylinderhead and flathead.
using 1 9mm potentiometer
and 3 16mm potentiometers from musikding
(the usual electronic shop pots had an unsatisfactory quality)
also 2 sparkfun linear potentiometers

joystick is rather stiff and i still have to figure out the return spring system for the jaw controll
Turns out my UNO cant play joystick, have to get an Leonardo.

printed everything with a 0.8 nozzle, and all the screw an axel measurments are made for an 0.8 nozzle print.

using an 8mm aluminium pipe (so i can hide wires) and 5mm aluminium rods for all other axels, to block rotation where i dont need it i use 2mm brass rods or sometimes 2mm copper pipe as pins.

Buil