Thingiverse
BLV MGN Cube Heated Bed Cable Manager
por jsaintrocc
2
Descargas
1
Likes
0
Makes
This is a wireguide to keep your heated bed wires from getting in the way. It's designed to be reliable, lightweight, well ventilated and minimalist.
You'll need the standard 4 in zip ties to secure the cable guides and you'll also need 1 9mm wide/24 in or longer zip tie to act as the spine. See the BoM below.
# BoM
* 1 x [Utilitech 15-Pack 24-in Nylon Zip Cable Ties](https://www.lowes.com/pd/Utilitech-15-Pack-24-in-Cable-Ties/50005756) *Must be ~9mm wide and at least 600mm long*
* 4 x 4in Cable Ties
* 2 x M3 Square Nuts (Low Profile)
* 2 x M3 10mm Bolts
# Assembly Guide
[Link to the assembly guide](https://github.com/jsaintrocc/myblvmgncube/blob/master/manual/guide/18-heated-bed.md)
You'll need the standard 4 in zip ties to secure the cable guides and you'll also need 1 9mm wide/24 in or longer zip tie to act as the spine. See the BoM below.
# BoM
* 1 x [Utilitech 15-Pack 24-in Nylon Zip Cable Ties](https://www.lowes.com/pd/Utilitech-15-Pack-24-in-Cable-Ties/50005756) *Must be ~9mm wide and at least 600mm long*
* 4 x 4in Cable Ties
* 2 x M3 Square Nuts (Low Profile)
* 2 x M3 10mm Bolts
# Assembly Guide
[Link to the assembly guide](https://github.com/jsaintrocc/myblvmgncube/blob/master/manual/guide/18-heated-bed.md)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
