MakerWorld
2D Art
Zum Modell
BMW E30 M3 - Hueforge
36
Downloads
20
Likes
26
Makes
BMW E30 m3 - hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeIF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHTYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 2.88mm #000000 PLA Sunlu + 2.0 Black Transmission Distance: 0.1 #ffffff PLA Sunlu + 2.0 White Transmission Distance: 6.8 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 4.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #15 (1.28mm) swap to Black At layer #16 (1.36mm) swap to Red At layer #21 (1.76mm) swap to White At layer #24 (2mm) swap to Pumpkin Orange At layer #30 (2.48mm) swap to White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
