BMW Logo

I modified the center lines of the BMW logo with "Mdozer" and scaled the main logo from 12 cm to 37 mm and 27 mm, as these were the sizes I printed with a quality of 0.12 mm and a 0.4 mm nozzle. I also created two different keychain models in case anyone wants to print them as well. Colors: Black (base) + Silk silver (G-code M600 'change filament' (in my case at layer 10) for the BMW lettering and circles) Blue White The blue and white parts were printed twice (once in white and then in blue) using the G-code for 6 parts I’ve provided above. I printed two 37 mm logos and one 27 mm logo, so I needed 6 white pieces and 6 blue pieces for the 3 logos. For the base, I used black PETG at 240°C for the hotend and 72°C for the heated bed. For the other colors, I used PLA at 200°C for the hotend and 50°C for the bed. I highly recommend cleaning the nozzle thoroughly before and after each print, as well as when changing filaments, to ensure optimal quality for the lettering.