Boeing 737 Wiper

Here's my design of the boeing 737 wipers. This is non funtional, only for looks.
The wiper arm is adjustable in length, it's also splitted into two parts "arm extention 1&2" and needs to be glued together.

I used a real spring on the wiper arm, but i've included a printable one.

Since the wiper is 16 inches or 406mm long I needed to split it into two, to make it printable. If you have a big print bed like 400mm you can print the part "wiper".

I used real wipers for mine, boat/marine wipers, these ones:

https://www.ebay.com/itm/185507541231?hash=item2b311c70ef:g:GgUAAOSwCvFb-C1-&amdata=enc%3AAQAHAAAAsAGAaVJv%2F1xDEXVyCeg5EoCMknMy9Y7URcg39A%2F80TSK4ldZ2bsHOGapDwWiUzHnch809ZmKIfVX989adOpZ54uyw%2BeaO9X4nHzf%2BbH5m7F8H7ZGOVyoIDDsWxjuzJd7AHd%2FZ8mwyxVnSIwDm8413ujOO2eR0kMRi%2BsPvcjtUHG%2Bh5Ym1o1M23t69QAt%2BChzYvjWiZyzYCUvrl%2Fc%2FpJmWMeNZPAcvQFCuy%2FuBRwnrekD%7Ctkp%3ABk9SR8rPncnVYQ

If you use these, you need to remove the pop rivet and mount, to make it fit my design.

T