Stick shaker Boeing

This is my version/design of the Boeing stick shaker.
It's a little bigger then OEM, and uses a bigger motor.

I included 3 different size clamps (75/78/80mm), depending on what size tube/pipe you have on the yoke shaft

I used a 7,2 volt 550 motor (HSP-28446), but you're going to need a voltage regulator to slow the motor down, or else it's going to rip itself apart. 1,4 ish volts seems to be the sweetspot for maximum vibration, yours might be different, depending on what motor you use.

Things you need to build one is the following:
2x M6x35mm hex bolt
1x M6x25mm hex bolt
5x M3x20mm phillips head screws
1x M3x10mm screw
2x M4x10mm screws
2x M4x20mm screws
3x M5 nuts
3x M6 nuts
1x spring 7mm diameter x20mm tall ish
DC motor 7,2 or 12 volt 540 or 550 motor
Voltage regulator.