Thingiverse
Bolts
von jimthing_2000
151
Downloads
607
Likes
0
Makes
A series of bolts with hex heads.
Sizes are stamped on the heads.
6-32 6-40
8-32 8-36
10-24 10-32
1/4-20 1/4-28
5/16-18 5/16-24
3/8-16 3/8-24
7/16-14 7/16-20
1/2-13 1/2-20
I used PLA to print.
Layer Time 10 and Fan at 30%
Bed 60
Temp 210
First layer height: .24
First layer Line width: %120
First layer Speed: 25mm/s
First layerFlow: 1.05
First layer Part Fan Off
Brims.
For the smaller sizes, you may have trouble rendering the numbers on the heads in your slicer.
Sizes are stamped on the heads.
6-32 6-40
8-32 8-36
10-24 10-32
1/4-20 1/4-28
5/16-18 5/16-24
3/8-16 3/8-24
7/16-14 7/16-20
1/2-13 1/2-20
I used PLA to print.
Layer Time 10 and Fan at 30%
Bed 60
Temp 210
First layer height: .24
First layer Line width: %120
First layer Speed: 25mm/s
First layerFlow: 1.05
First layer Part Fan Off
Brims.
For the smaller sizes, you may have trouble rendering the numbers on the heads in your slicer.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
