Bookmark: Celestial Owl

Story: Adding to the Celestial Series. Trying new color combinations I have not used. Celestial Owl BookmarkPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 47x150mm Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Bronze Transmission Distance: 1.5 PLA BambuLab Basic Gold Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At height depth (0.96mm) swap to Brown A