MakerWorld

Office

Box

by Lund · Office

1.4k Downloads

125 Likes

420 Makes

Custom box that you can print in place with 0,4 nozzle, 0,2 is better for the hinge, but it takes looonnnggg. This is cca 3h on bambulab. I suggest using transparent petg for best look.

making workshop box custom decor szstem systematizer system diy organize organizer

Category

Office

Source

MakerWorld

Published

02.03.2024

Updated

30.04.2026

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Box need supports when printing?

Nope — Box is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Box?

According to the design notes, Box takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Box available in?

Box is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Box free to download?

Yes, Box is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Box

Similar Models

Add to Collection