Thingiverse
BPS Rocket Cradle
door JoeBarnard
105
Downloads
92
Likes
9
Makes
Product description:
https://youtu.be/LRB1dXVIjbA
Use this mount to hold your model rockets for display or work! Both the large and small V mounts will hold most low and mid power model rockets. You can also use the 10mm or 20mm extensions if you need more room for fin clearance or otherwise. I recommend the BPS branded base, but feel free to use the non-branded mount, or add your own logo to the STL file!
If you want to design your own top component to fit on the base, I recommend using the CAD drawing in the photos for reference. Start with a 30mm square, add 4 evenly spaced 3.5mm holes between the center and each edge, put one in the center and extrude 5-10mm. Then chamfer the corners 5mm to exactly match the base and you're all set. Let me know if you have any questions!
https://youtu.be/LRB1dXVIjbA
Use this mount to hold your model rockets for display or work! Both the large and small V mounts will hold most low and mid power model rockets. You can also use the 10mm or 20mm extensions if you need more room for fin clearance or otherwise. I recommend the BPS branded base, but feel free to use the non-branded mount, or add your own logo to the STL file!
If you want to design your own top component to fit on the base, I recommend using the CAD drawing in the photos for reference. Start with a 30mm square, add 4 evenly spaced 3.5mm holes between the center and each edge, put one in the center and extrude 5-10mm. Then chamfer the corners 5mm to exactly match the base and you're all set. Let me know if you have any questions!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
