Brick Train Tracks

Introduction:Since the big L(e)go Purge, it was really hard to get any rail design from the internet, until now. Ive constructed any curved standard rail, “almost” in compliance with the L-Gauge standard ( http://l-gauge.org/wiki/index.php?title=Track_Geometry ). A big focus of attention was set to the connection between the different rails. It fits really well with tracks, of its own kind and other manufactures.Settings:Layerheight 0.2mm or higher (otherwise, the connection wont work)10% Infill should be enoughNo support, bridge speed 60 mm/sIf your prints tend to warping (like mine do), I would highly suggest to use a brim or gluestickIroning on the top layerChoosing the Tracktype:The file name has the following structure:The unit of the radius is in L(e)goblocks (=8mm). The radius is meassured from the centerline of the track.In this example the distance from the centerline of the track to the centerpoint is “72 Studs" = 576mm. The span of the track is α=11.25°. This means 8 tra