Broken Hearts

A tryptic I made using Midjourney for fun. I thought it was quite beautiful and decided to translate it into Hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Red Transmission Distance: 5.5 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest. If you want to change the scale of a Hueforge, only change the X and Y axis. Leave the Z scale at 100% or you will affect the final image.