Thingiverse
BSA case
door Wierzbowsky
2
Downloads
7
Likes
0
Makes
Here you can find the model of the case for the MSX BSA project, that was developed by RBSC. The models include the upper and the lower parts of the case. The models of the pin and feet are also included.
Also included is the model of the case's bottom with it top layer covered by the 0.2mm polygon. This model has "noholes" string in its name. This method ensures the high quality of the surface of the printed model as the printing head is not moving around when printing the first layer. The necessary holes can be cut later with a sharp knife. The screw holes can be opened by gently inserting a Philips screwdriver into them.
The project files are available in RBSC's Github repository:
https://github.com/RBSC/BSA
For engraving I am using the KKmoon 3000 mW laser engraver:
https://www.amazon.de/KKmoon-Lasergravur-Werkzeuge-Automatische-Gravurfl%C3%A4che-Rot/dp/B07H3PWLNG/
If you want to make a small donation in appreciation of my humble efforts, please use the "Tip desig
Also included is the model of the case's bottom with it top layer covered by the 0.2mm polygon. This model has "noholes" string in its name. This method ensures the high quality of the surface of the printed model as the printing head is not moving around when printing the first layer. The necessary holes can be cut later with a sharp knife. The screw holes can be opened by gently inserting a Philips screwdriver into them.
The project files are available in RBSC's Github repository:
https://github.com/RBSC/BSA
For engraving I am using the KKmoon 3000 mW laser engraver:
https://www.amazon.de/KKmoon-Lasergravur-Werkzeuge-Automatische-Gravurfl%C3%A4che-Rot/dp/B07H3PWLNG/
If you want to make a small donation in appreciation of my humble efforts, please use the "Tip desig
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
