Burn Kettlebell Magnet

A 2 inch tall Kettlebell magnet.The logo on front is for the Burn Boot Camp gyms.Magnet hole on back is designed for 6mm x 3mm magnets. I created this for a little competition at our local Burn. Printed on an X1 Carbon0.4 nozzle0.2 layer height6 walls25% infillno supports needed when printing just one. If printing multiple at same time, I suggest using supports just to help with bed adhesion. Also add a brim if printing a bunch at once.I blocked the seam from showing on the front of the model.All seams should be on the backside. Printing a single model with dual colors using the AMS is quite the time suck. and filament poop party.One single kettlebell is clocking in at a bit over 4 hours.16 on one plate took about 16 hours. I grouped these ones in groups of 8 and had it print per object. so 8 at a time on one plate. A single kettlebell with only one color is a 38 minute printing time DISCLAIMER:This is not in any way associated with the Burn Boot Camp company.It is an unofficial creati